ich habe ein Problem auf einmal funktioniert der automatische email-versand nicht mehr . mit marshallsoft und stunnel.
bei stunnel scheint er wohl auf einen Fehler zu laufen. am quellcode, sowie an stunnel hat sich nichts verändert
Konfiguration von stunnel
Code: Alles auswählen
; Sample stunnel configuration file for Win32 by Michal Trojnara 2002-2014
; Some options used here may be inadequate for your particular configuration
; This sample file does *not* represent stunnel.conf defaults
; Please consult the manual for detailed description of available options
; **************************************************************************
; * Global options *
; **************************************************************************
; Debugging stuff (may useful for troubleshooting)
;debug = 7
;output = stunnel.log
; Enable FIPS 140-2 mode if needed it for compliance
;fips = yes
; Initialize Microsoft CryptoAPI interface
engine = capi
; Also needs "engineID = capi" in each section using the CAPI engine
; **************************************************************************
; * Service defaults may also be specified in individual service sections *
; **************************************************************************
; Certificate/key is needed in server mode and optional in client mode
cert = stunnel.pem
;key = stunnel.pem
; Authentication stuff needs to be configured to prevent MITM attacks
; It is not enabled by default!
;verify = 2
; Don't forget to c_rehash CApath
;CApath = certs
; It's often easier to use CAfile
;CAfile = certs.pem
; Don't forget to c_rehash CRLpath
;CRLpath = crls
; Alternatively CRLfile can be used
;CRLfile = crls.pem
; Enable support for the insecure SSLv2 protocol
;options = -NO_SSLv2
; Enable support for the insecure SSLv3 protocol
;options = -NO_SSLv3
; Workaround for Eudora bug
;options = DONT_INSERT_EMPTY_FRAGMENTS
; These options provide additional security at some performance degradation
;options = SINGLE_ECDH_USE
;options = SINGLE_DH_USE
; **************************************************************************
; * Service definitions (at least one service has to be defined) *
; **************************************************************************
; ***************************************** Example SSL server mode services
[pop3s]
accept = 995
connect = 110
[imaps]
accept = 993
connect = 143
[ssmtp]
accept = 465
connect = 25
; Example SSL front-end to a web server
;[https]
;accept = 443
;connect = 80
; "TIMEOUTclose = 0" is a workaround for a design flaw in Microsoft SSL
; Microsoft implementations do not use SSL close-notify alert and thus
; they are vulnerable to truncation attacks
;TIMEOUTclose = 0
; ***************************************** Example SSL client mode services
; hiermit ausgang OK
[gmail-pop3]
client = yes
accept = 127.0.0.1:110
connect = pop.gmail.com:995
[gmail-imap]
client = yes
accept = 127.0.0.1:143
connect = imap.gmail.com:993
[gmail-smtp]
client = yes
accept = 127.0.0.1:25
connect = smtp.gmail.com:25
; Proxy authenticated with client certificate from Windows certificate store
;[example-proxy]
;client = yes
;engineID = capi
;accept = 127.0.0.1:8080
;connect = example.com:8443
; Service based on a command-line tool
;[netstat]
;accept = 8015
;exec = c:\windows\system32\netstat.exe
;execargs = netstat -a
; Remote cmd.exe protected with SSL
; Certificate-based authentication needs to be configured for this service!
;[cmd]
;accept = 1337
;exec = c:\windows\system32\cmd.exe
; vim:ft=dosini
die Log-Datei
Code: Alles auswählen
File #1 () does not exist*** seeIntegerParam(0,8,1)
*** seeSetProxySSL(0,1,'C:\SEE4XB\SSL\','stunnel.pem','stunnel.exe')
*** seeSmtpConnectSSL(0,8801,25,'w00fb7fe.kasserver.com','transfer@sprinter-software.de','*','<transfer@sprinter-software.de>','',''
*** seeStringParam(0,58,'transfer@sprinter-software.de')
*** seeStringParam(0,57,*)
*** seeIntegerParam(0,29,1)
*** StartStunnel(0,'Smtp')
C:\SEE4XB\SSL\stunnel.exe C:\SEE4XB\SSL\SmtpConfig(0).txt
CreateProcess 0: pid=868 thr=864
Stunnel started (chan 0, process 0)
Connecting...
<200:28160988>
VS Win32 Version 7.3.1 Build 2
SEE Win32 Version 7.3.1 Build 2
SPRINTER Software GmbH
CID=12559
<101:28160988>
vs: LogHandle = 860
vSock 0 created (IP 0)
<102:28160988>
LocalHost = 'Elite8000'
<104:28160988>
Server = 'ELITE8000'
ServerIP = 192.168.120.254
<105:28161097>
vsConnect(0,'ELITE8000',8801) attempt 1
Socket=888, RemoteIP=c0a878fe, RemotePort=8801
connect(888) returns -1
vsConnect(0,'ELITE8000',8801) attempt 2
Socket=888, RemoteIP=c0a878fe, RemotePort=8801
connect(888) returns -1
vsConnect(0,'ELITE8000',8801) attempt 3
Socket=888, RemoteIP=c0a878fe, RemotePort=8801
connect(888) returns -1
vsConnect(0,'ELITE8000',8801) attempt 4
Socket=888, RemoteIP=c0a878fe, RemotePort=8801
connect(888) returns -1
vsConnect(0,'ELITE8000',8801) attempt 5
Socket=888, RemoteIP=c0a878fe, RemotePort=8801
connect(888) returns -1
ERROR(28269097): SockCode=-10060 SeeCode=-36 PrevState=104 ThisState=105 NextState=105
Error attempting to connect.
Error attempting to connect. Timed-out attempting to connect.
Timed-out attempting to connect.Error attempting to connect.
*** seeDebug
*** seeRelease: Win32 12559 7.3.1 (2) ***
KillStunnel(0) pid=0
TerminateProcess 0: pid=868 thr=864
Cound not kill Stunnel (chan 0, process 0)
vSocket: 0 closed
*** Releasing channel 0 ***